Hi Guys, I recently put this gear into a new cabinet and for some reason I cannot for the life of me get OSCAR up, or for the LCD to play nicely with the 3200. Here're the tests I've done: - I can connect the LCD/Keyboard/Mouse directly to a server and it works flawlessly (using the same cable as used to the AutoView 3200). - I can connect the LCD to a different server with different (non-grouped/avocent cable) and works fine too! - I can connect to the 3200 over the serial port (and did a factory reset) - I can connect to the 3200 over the web interface - I have used a different keyboard (than the one in the LCD17 SRP001) and tried the print screen press there, no luck. - I have tried rebooting them in different orders, (first LCD, then 3200. First 3200, then LCD). - I have tried rebooting them with things plugged in, and without (a number of combinations) - I have upgraded the 3200 software to the latest version - I have tried a different set of cables to / from the LCD17 and the 3200 No matter what I do, I can't get OSCAR, nor anything at all, to display on the device itself. What am I missing?
↧