Wiki Page: PM3000 not displayed in IPDU Power Mgmt page in ACS5000
Environment: PM3002V-401 firmware 2.0.1.22 ACS5008-105 firmware 3.3.0.16 Issue: ACS5000 does not detect the connected PDU with "Power Management" profile. ACS5000's serial session can access the...
View ArticleWiki Page: DSView4 what are the communications port and hyper-v
DSView4 what are the communications port and hyper-v，please advise, thank you!
View ArticleForum Post: PM3000 serial connection to Cisco 2911 async (octopus) cable
Hello, We're using Cisco 2911 console servers to manage our devices out-of-band. So far we were able to connect to any device using a RJ-45 serial console port. However we haven't had any luck...
View ArticleForum Post: Help with AutoView 3200 and LCD17 SRP001
Hi Guys, I recently put this gear into a new cabinet and for some reason I cannot for the life of me get OSCAR up, or for the LCD to play nicely with the 3200. Here're the tests I've done: - I can...
View ArticleForum Post: problem with ECS17KMM8
ECS17KMM8 problem , it has nothing that appears on the screen. The ON / OFF light flashes red prmanence even if I press the button
View ArticleForum Post: Is the new Firmware V_3.1.0.8 for the ACS6000 series addressing...
Hello, I see that the new firmware released for the Avocent ACS6000 have a new Openssl upgrade. is this new version of openssl addresses the POODLE vulnerability? Also, it also mentions that ssl is no...
View ArticleForum Post: RE: Is the new Firmware V_3.1.0.8 for the ACS6000 series...
HI, yes this release adresses poodle, please see the release notes for the browser support. TLS can be configured from the browser, you can select 1.1 or 1.1 & 1.2 or 1.2 please be aware that not...
View ArticleForum Post: No WEB console
Hello, all. I am using an Autoview 3008 from ayear ago, but a couple weeks ago, I find that the WEB console is´nt working. I have tested the IP, change the IP settings (it means IP adress, Gateway and...
View ArticleForum Post: RE: No WEB console
from your client, use command line *(CMD) and run a quick test for us here: telnet xxx.xxx.xxx.xxx 443 Hint xxx is for your IP of your device (AV unit) Should the screen come back clear the port is...
View ArticleForum Post: Connect to DSR2035 SETUP port from laptop w/o serial port
Hi, new to this forum. I ahve a DSR2035 and need to reset the network address as we moved Datacenter. I would like to use the SETUP port to reconfigure the network setting. Currently using the black...
View ArticleForum Post: Unable to update firmware for AMX5000
We have an AMX5000 that I would like to update the firmware on. Using AMworks (any version I've tried) and using any firmware version.... results in the same failure.. FTP session starts, file is...
View ArticleForum Post: Avocent Viewer Plug-in Installation
I have got a problem with installing plugin. I tried all browsers, only Firefox showing pop-up window with download plugin, but I could not install this plugin. It starting I see progress bar for a 1...
View ArticleForum Post: RE: DSView Serial Session Windows Does Not Open
I have the same problem, I notice that only Firefox is working, but I am not able to install the plugin. Did you find out the solution?
View ArticleForum Post: RE: Connect to DSR2035 SETUP port from laptop w/o serial port
Hello Eric, The DSR2035 came with the black adapter and 8-wire reversing cable A.K.A rollover cable, that's what need to be used in conjunction with the terminal software and correct settings: - The...
View ArticleForum Post: RE: DSView Serial Session Windows Does Not Open
Hello Michael, Based the provided details and screenshot, it seems that the viewer is in the process on installing on your local client machine however you don't seem to have local admin rights to...
View ArticleForum Post: RE: Avocent Viewer Plug-in Installation
Hi, Check your pop-up blocker settings to make sure that it is disable prior to launching viewer, also make sure that you add the server or switch in the Exceptions of the Firefox under the...
View ArticleForum Post: RE: Unable to update firmware for AMX5000
Hello Dave, I am not sure why this is failing, but make sure that the CONF ID is the same, meaning if the AMX has 0000001 to make sure your AMWorks has the same. Should this not be the case then you...
View ArticleForum Post: RE: Unable to update firmware for AMX5000
Hello Dave, Make sure that the machine that has AMWorks installed doesn't have a firewall application actively blocking FTP traffic which AMWorks needs to transfer files to the appliance (switch). If...
View Article