Forum Post: RE: Problem with Windows 7 on AMX network?
When will Avocent support Windows 7?
View ArticleForum Post: HMX Manager IP setup
Hi All,I have a questions regards to the HMX manager IP setup.I have 2 VLAN on the network as below:VLAN1Subnet: 10.99.31.0Range: 10.99.31.10-127NetMask: 255.255.255.128Gateway: 10.99.31.1VLAN2Subnet:...
View ArticleForum Post: RE: How can I burp my ACS32 WEB interface?
Hello,The problem is you are on an older firmware version and you're using an unsupported Browser.Only IE 6, 7 and 8 are supported for this legacy ACS32.You should also try to upgrade your firmware...
View ArticleForum Post: RE: LVIPHR-R TCP/UDP ports used
Hello Ben; While I do understand your desire for more information on the protocol, that is proprietary and intellectual property of ENP Avocent. Other than the TCP port information that youalready...
View ArticleForum Post: RE: HMX Manager IP setup
But there is 2 subnets set on the corporate VLAN, one is 10.207.90.0 and second one is 10.207.90.128, both with netmask 255.255.255.128. I want to set the MGR as 10.207.90.140. How can I assign the...
View ArticleForum Post: RE: Autoview 1515 - Password lost
Hello jacota; Yes there is a way to override the password of the AV1515 for the admin account. There is no "factory default" that will clear all passwords and coinfiguration. You can take care of...
View ArticleForum Post: HMIQSHDI transmitter power supply not working
We purchased 5 KVMs back in July of 2013 as per quote #20042529. One of the KVM transmitters model HMIQSHDI has the power supply damaged. We need a new power supply for that transmitter. It’s a 100-240...
View ArticleForum Post: RE: HMX Manager IP setup
Eth0 will be on a private network with all Rx and Tx. But my question is if I have 2 subnets available for Eth1, say 10.207.90.0 (range from 10.207.90.10-127) and 10.207.90.138 (range fro m...
View ArticleForum Post: Error when reading from SSL socket connection
Recently upgraded to Dsview4. One group are having trouble with virtual media. They are getting the error above.. is this a rights issue ?
View ArticleForum Post: OSCAR/MPU: How to display more than one/1 KVM-session (next to...
HelloSometimes ago we were using IBM LCM, RCM and the built-in tool OSCAR to manage KVM-sessions(I think Avocent did built them for IBM :-). We are contempating about"switching" to the MPU :-)As I...
View ArticleForum Post: Booting from virtual media via USB on MPU2032
Hello,The Avocent MPU2032 I use is primarily used for imaging multiple machines. These machines are booted from a USB flash drive and then pull the files need from network storage.What I'd like to be...
View ArticleForum Post: RE: How can I burp my ACS32 WEB interface?
Thank you, Stefan.I ended up having to reboot the device and, once it was back up, browser access returned to normal. The symptoms probably had something to do with the fact that 78% of the cpu was...
View ArticleForum Post: error 02
i have replaced batteries of my Liebert GXT MT+ ups but itz giving error 02 and beeping continuously.....plz help
View ArticleForum Post: RE: Switchview SC140 Erratic Mouse
On your Target you should be disabling Mouse acceleration, in most cases that resolves the issue. Nonetheless, sometimes you have deeper laying issues and a support call should be required. I hope this...
View ArticleForum Post: RE: HMIQSHDI transmitter power supply not working
Hello tdelgado, please call 888-793-8763 and open a case for the replacement. You can also open a case through email to support.avocent@emerson.com Please provide in this call / email the SN# of the...
View ArticleForum Post: RE: HMX question about control
The HMX is a Video/Keyboard and Mouse extender product. It is capable of streaming high Resolution video. The Receiver is a Desktop user station or dumb terminal as it is named in some environments....
View ArticleForum Post: RE: DSView 4 Service not starting
When installing or even migrating DSView all applications during install such as the dsview.exe should be run "Run as Administrator" function on 2008 and or Windows based systems. This is a common...
View ArticleForum Post: RE: Upgrading AMX5000 to AX5010
When you cascade, here is the basic rule. 1) you get out of at least 3 target ports into 3 User Station ports of the secondary switch, this creates 3 pass-ways to the second switch. Should you need...
View Article