File: Trellis BUILD FAILED on the Front Upgrade with UnmarshalException Error...
ISSUE : Trellis BUILD FAILED on the Front Upgrade with UnmarshalException Error During Deploy Symbols DESCRIPTION: Once the Trellis on the Backend successfully built and upgraded, any attempt to...
View ArticleTrying to get port forwarding from 18001 to 8001 working on Trellis as I am...
Trying to get port forwarding from 18001 to 8001 working on Trellis as I am feeding Trellis informtion fom another internal system and it keeps failing.>>! in DCIM Support
View ArticleForum Post: ACS6016
Working with a customer that hasthe following.... "We are looking for the capability to plug a Tripp-Lite USB to RJ45 Cisco Rollover cable Model: U209-006-RJ45-X from two of our servers USB connections...
View ArticleForum Post: One HUB server for three remote offices
We have three offices and each office has its own DSView Hub and Spoke. We are upgrading to v 4.5 in the near future and would like to restructure this to better address failover scenarios presented by...
View ArticleI have a newly installed 2216 Avocent autoview KVM switch that I have...
I have a newly installed 2216 Avocent autoview KVM switch that I have connected to 9 servers. I cannot display any of the interface ID's or server names. I get no display of devices. All my servers...
View ArticleForum Post: DSView4 configuration template - issue
Hi, I recently tried to mass update number of ACS6000 devices (with firmares from 2.5.0.5 to 3.1.0.8) through DSView 4 configuration template. The goal was to update the Tacacs+ servers on all devices....
View ArticleForum Post: ACS 6000 Setup - No Ports Listed in Access Menu
We're upgrading from an ACS 5000 to a 6000 series. I've run through the setup wizard, and I can access the web interface. I have a test port configured and I can see the following signals on the port:...
View ArticleForum Post: ACS5016 - Console (SSH) connection fail. Telnet works fine.
Recently purchased some ACS5016's and are having trouble getting the Console (SSH) to connect from various SSH clients. We have our test device on Port 3 so TCP 7003. We setup a local user account on...
View ArticleForum Post: Factory Reset Avocent DSR2035 problems
When i boot the KVM the terminal has no output using a serial cable connected to the setup port(9600,8,1,none,none) any tips? or other ways to wipe the KVM?
View ArticleForum Post: Factory Reset DSR2035 Problems
When i boot the KVM the terminal has no output using a serial cable connected to the setup port(9600,8,1,none,none) any tips? or other ways to wipe the KVM? using putty terminal emulator.
View ArticleForum Post: FTP Cyclades TS2000
I have a Cyclades TS2000 that I am having problems with. I keep getting this error: Kernel panic: No init found. Try passing init= option to kernel. I am able to get to a prompt by loading through...
View ArticleForum Post: ACS 6000. Java error using webgui with IE 11
1Hi We have been using the ACS 6000 series switch for a good number of years (three ACS6048's and an ACS6016). Our organization recently standardized on IE 11 and we upgraded the firmware from 2.5.0.12...
View ArticleForum Post: new servers not showing in Target List
We have an Avocent MPU 8032 switch and have recently added 4 servers to the switch. For some reason they are not showing up in the Target List. I've tried swapping USB ports, dongles, even rebooting...
View ArticleAnybody ever seen messages like this... NFS logging is not working due to...
Anybody ever seen messages like this... NFS logging is not working due to this issue... it only starts on like 2 ports before throwing this message for the remaining ports... Unable to create/open file...
View ArticleForum Post: Too many open files
Avocent 5048 configured with databuffering enabled to nfs server.... at least it's supposed to be but only 1 or 2 ports start buffering before seeing this message for the remaining ports Apr 22...
View ArticleWiki Page: Factory default UMG via CLI
UMG firmware DIST_REL="3.1.4.16 rdist" Enter cd /system/administration/firmware/ At the firmware prompt, enter “factoryRestore “ Example: firmware>set factoryRestore Enter yes at the prompt Example:...
View ArticleForum Post: SN-TH Sensors
Dear , We have Trellis Inventory and Change Manager , and Site Manager . how we are going to monitor or display in Trellis Software the SN-TH Sensor in PDU . In other hand it is going to be a sub (...
View ArticleForum Post: HI Switch
HI Any worked on Hiswitch, Alarm: S1 SCR SHORTSource 1 SCR Short The client has replaced all SCRs and driver PCB's and snubber PCB.But fault still persists. I will be going to site tomorrow anyone had...
View Article