Support

Thank you SebastienP. I rolled back to 8U45 as well and it tested OK.

I agree resolved but I believe Emerson/Avocent should fix because so many other tools and app require the very latest Java to work properly.

You're right. I changed it to read WORKAROUND. Thanks!

I can not upgrade umg4000 firmware, I try to update menu and then select firmware, the system show status of copy firmware and then no any happen change. in Avocent Support

my current firmware is 1.0.4.7

Ok . Now I can upgrade it :)

Hi, We have a lot of ACS48 console servers with many devices attached. It has got a bit out of hand over the years and we have lost track of what is connected to what. As systems have been decommissioned but not removed from the device names on the ports. Is there a quick way to check if the ports have anything connected to them without ssh'ing to each individual port or going down to the data centre? we use dsview 4 to manage them.

Hello Adam; If you navigate to the appliance thru DSView you can look at each port to see if there are "signals" present on the "Ports" page. If there are no signals present that port may not have anything conencted to it. V/R Danny

Hi Danny, thanks for the quick reply, but I cant find that signal column. Are you talking about the ports page from selecting the console server, Appliance settings drop down, ports? I only have columns for: port, appliance name, port status, type, baud, data bits... is there some way I can add a signal column? im using DSview 4.1.0.54

Hello Adam; in DSView select the appliance in question. Once that it in your DSView window, look over at the left column and then select "Ports adn then serial ports" and the page should have a column headed as "Signals" V/R Danny

yea, that's where I am looking. Its not there. Must either have to enable it or its a feature of a newer dsview version. thanks Adam

I've got two machines connected to the switch and the kvm this, however despite having set the ip kvm each one of them keeps dropping the connection.

Error message includes Secure Connection Failed, An error occurred during a connection to XXX.XXX.XXX.XXXX. The server certificate included a public key that was too weak. (Error Code: ssl_error_weak_server_cert_key) I have loaded the latest firmware with same result. Is there a fix??

the below document will assist you to overcome and work around the issue on the latest browsers (Please visit the site to view this file)

A client, a COLO site, wants to migrate to DSView4 but wants to save all the units and Unit Groups, for rechecking, to CSV and later to Excel. It is very important that all units are identified by their respective groups. Any help shall be highly appreciated.

Dear folks I need your help to configure Dual Monitor in such configuration that one monitor for one page and the other one for the other page. If Page A is opened on Monitor 1 then it can't be opened on Monitor 2.

I updated DSView with a cert that may have been in the wrong format. We just rebooted the server and now the webpage will not load in my browser due to a cert error. Does anyone know of a way to update the cert without the GUI? or A way to get my web browser to not care about the validity of the cert being used? This is the error I get in firefox. "A PKCS #11 module returned CKR_DEVICE_ERROR, indicating that a problem has occurred with the token or slot. (Error code: sec_error_pkcs11_device_error)"

Hi all, I use the radius_down_local authentication, but the local authentication don't work when radius is down, it works on v2.5.0.12 but not on next firmwares. I just try the new v3.1.0.9 and the problem still here .. Please could you work on a patch to this problem, I can't upgrade my ACS because of this bug .. Best regards.

I've installed the latest 2.1.0.23 firmware for the PM 3000 in the hope of patching the long running POODLE vulnerability. After installing the firmware and running a well known commercial vulnerability scanner against it, the device is now showing more vulnerabilities than before such as Apache multiple vulns, OpenSSL < 1.0.1n, SSH vulns, Logjam, FREAK and BEAST. All vulnerabilities are medium to high risk. Has anyone else seen this?

Is there any known issues with the power supplies for the ecs17kmm-001 (liteon 12v/5a)??? I have 5 racks, each with a ecs17kmm-001 and i have lost 3 displays over the last 3 months (flashing red/grn LED). Units are not even 9mo old yet. Theres no power problems in my data center that i know of- everything is on uninterruptible sources. The kvm itself seems to be ok because i can hook up a stand-alone monitor to it and the unit works. Are these PSU's replaceable?? thanks

Forum Post: RE: Avocent AutoView 3016 "Network connect error" using KVM over IP.

Forum Post: RE: Avocent AutoView 3016 "Network connect error" using KVM over IP. RESOLVED!

Forum Post: RE: Avocent AutoView 3016 "Network connect error" using KVM over IP. WORKAROUND!

I can not upgrade umg4000 firmware, I try to update menu and then select firmware, the system show status of copy firmware and then no any happen change. in Avocent Support

Comment on I can not upgrade umg4000 firmware, I try to update menu and then select firmware, the system show status of copy firmware and then no any happen change. in Avocent Support

Comment on I can not upgrade umg4000 firmware, I try to update menu and then select firmware, the system show status of copy firmware and then no any happen change. in Avocent Support

Forum Post: How to test TCP ports on ACS48

Forum Post: RE: How to test TCP ports on ACS48

Forum Post: RE: How to test TCP ports on ACS48

Forum Post: RE: How to test TCP ports on ACS48

Forum Post: RE: How to test TCP ports on ACS48

Forum Post: TWO DIFFERENT IP KVM WITH FALLING AND CONNECTION

Forum Post: Unable to connect remotely to my 3016 with either Win7 or XP client.

Wiki Page: HMX Manager SSL weak encryption warning in your browser

Forum Post: Export Units and Unit Groups to CSV from DSView3

Forum Post: Dual Monitor Configuration/Setting in DeltaV 12.3

Forum Post: Cannot access DSView webpage due to bad web Cert

Forum Post: Radius_Down_Local fallback fail since v2.5.0.12

Forum Post: PM 3000 firmware 2.1.0.23 (Jul 10 2015) more vulnerable than before

Forum Post: ecs17kmm-001 - display power supply issues