Forum Post: RE: Both Switchview 1000 (not connected) hang
Hello Theo;So even after you power cycled the SV1000's you do not have any control of the SV1000's at all? I would suggest that you check all of the connections to the SV1000's Keyboard, monitor, and...
View ArticleForum Post: RE: Unable to integrate SP on UMG
Hi,What Service Processor are you trying to add?You want to do this rather from the "SP Management" Tab.So, go to: Administration--->Extend "Targets"--->Select "SP Management" ---> Select...
View ArticleForum Post: RE: not able to access ACS32 through console port
Hi,Do you have another ACS that you could try your adapter and Hyperterm settings on? Are you getting correct output there?
View ArticleForum Post: KVM over IP HMX Manager
Are there periodic preventive maintenance checks required on the HMX mangers and if so, what do they entail?
View ArticleForum Post: KVM over IP transmitter error
I am having an issue with our customers who use the Avocent KVM over IP units to access any random target workstation within the network. When a random user with his/her own account attempts to reach...
View ArticleForum Post: RE: DS View Download? Or What?
In that case you could go with a small business AutoView 3008 or AV3016 switch. They have an Onboard Web-Interface and you can connect 8 or 16 computers. However they can't be managed by Dsview. The...
View ArticleForum Post: RE: ACS6048 - using ctrl-x in Secure CRT gives Exception
Please upgrade to firmware version 2.5.0.7 found here:www.avocent.com/.../ACS_6000_Advanced_Console_Servers.aspxThat should resolve this issue.Regards,Stefan Liedtke
View ArticleForum Post: MergePoint Unity Reboot/LDAP Issue - RESOLVED
We recently purchased an MPU-4032 that came with the latest RELEASED firmware (1.18.0.22011). I attempted to configure it for LDAP using a document called "LDAP-DSR-AV" that's floating around on the...
View ArticleForum Post: RE: Cyclade TS-2000 firmware needed.
Hi again,i've managed to recover to version 1.3.3 again. So i'm back to stage 1 ;-)How do i proceed from here?Seems to me i need the in-between version 1.3.4 (and apparently also the alternate boot...
View ArticleForum Post: Need to change DSView admin password on HUB and Spokes, are there...
I logged in as Admin and I can go to DSView administrator and can change the password right there on all DSView Management servers.Do I need to follow any sequence or steps to complete it successfully?
View ArticleClik here to view.
Wiki Page: UMG - Sensors showing -40 value in temperature
As per UMG engineering/development group, This is expected behavior. When no temperature sensors are attached the default value will be -40 degrees.
View ArticleForum Post: RE: What Cables do I use between the TS3000 and the Cisco console...
You would need a Cisco console adapter part No: ADB0039 and a straight trough Cat 5 cable.Regards,
View ArticleForum Post: DSV4 not establishing an 'Appliance Session' with any discovered...
After discovery, DSV4 cannot establish an 'Appliance Session' with any ACS-48. The ACS opcodes are at V_3.2.1 and V_3.3.0-10. A locally sourced pop-up security login window to authorize the...
View ArticleForum Post: RE: DSView Backup ZLIB error
Nevermind :P. answered the question myself after continuing to tinker. Just added an additional parameter to LD_LIBRARY_PATH to resolve the issue. For others with the problem, the line now looks like...
View ArticleForum Post: RE: DSR1020 not detecting DSRIQ-USB modules.
A long time since reply - Yes both the modules and KVM are Avocent branded.My theory is that the modules (second hand) are running a later firmware than the KVM.Looking for a way to test this theory out.
View ArticleForum Post: UMG4000 MIB file
Where is the SNMP MIB file for the UMG4000-400 located?Thank you
View ArticleClik here to view.
Forum Post: Data Center Planer - User Active Directory
Dear support,Our customer have already got user to connect to AD. But when we add username + password to AD we got this error.This is a capturePlease ASAP give the reason root case this error and...
View ArticleForum Post: RE: Number of administrators who can access ACS6008?
Hello DannyThank you for information.i'll feedback to our customer.Regards.Tomoyuki
View ArticleForum Post: RE: ACS 600x cascade and session hot key problem
P.S.You can get more information about the ts_menu command by running the following command from the shell: ts_menu --help
View Article