Hi, Running a large site with over 100 DSR 2030 and usb dongles. Having issues in the last couple of months with virual media files being too big and sessions failing What is the latest version of firmware I should be running on these ? Running Dsview 4 thanks.
↧
Forum Post: DSR 2030 Latest Firmware
↧
Forum Post: MPU4032 Console Connection
We have an Avocent MPU4032 that we are experiencing issues with. The plan was to do a factory reset on the device, however I cannot access the device via the "Setup" port. I am confident that my settings are correct for the serial port, but no matter what variations I try I get no output on the console. From what I gathered, I should see a prompt when the machine boots up, however this is not the case. It seems that this should be a very simple thing to do, similar to any other console connection. This is urgent as this device needs to be operational ASAP. Please advise what steps can be taken to get this resolved. Thank you in advance!
↧
↧
Forum Post: Automation for server OS builds via iDRAC/DSView
My company is wanting to start rethinking how we deploy automated server OS builds. The primary server platform is UNIX on Dell hardware. Is there a way that anyone is aware of to utilized the iDRAC/RACADM to perform automated server builds though DSView or the UMG4000's?
↧
DCP change sql password in Avocent Support
DCP change sql password in Avocent Support
↧
DSView version 4.5.0.140 "downloading Viewer control, please wait" in IE9. in Avocent Support
DSView version 4.5.0.140 "downloading Viewer control, please wait" in IE9. in Avocent Support
↧
↧
Forum Post: DSView version 4.5.0.140 "Downloading the viewer control, please wait" problem in IE9
As I understand, the dsview system automatically download the viewer control plugin from the dsview server and install it. I ran IE9 with a priviledged account, then allow the addon "dsview appTracker control", After that i got this message "An add-on for this website failed to run" when i used dsview3, I can use AvctViewerPlugin.msi to install the viewer control manually. where is this file now in DSView version 4.5.0.140 ? Thanks.
↧
File: DKMMLED-XXX Letter of Volatility
↧
Forum Post: ACS6000 Upgrade 2.5.0.12 to 3.0.0.13 Errors
Greeting, I am trying to upgrade from 2.5.0.12 to 3.0.0.13, but unsuccessful. When I try it from the WEBUI, I receive a message that the image being upgraded to is older than the current version and if I proceed, the configuration will be factory-defaulted. When I scp the image to the box and try to upgrade using "flashimage" from the cli, I get the below error. I have also tried to upgrade to V_3.1.0.4 with the same results. Jul 9 19:33:59 serial01-nj1 event_notify: EVT[11]:Image upgrade started. User: root. Current version: 2.5.0.12. New version: 3.0.0.13. Extracting kernel image Extracting and uncompressing the ramdisk image Mounting the ramdisk image Erasing /dev/mtdblock1. Copying Linux kernel to /dev/mtdblock1. [error.firmware.command] Error in command '/usr/sbin/nandwrite -q /dev/mtd1 /tmp/tmp1/kernel -p'. Jul 9 19:34:15 serial01-nj1 event_notify: EVT[12]:Image upgrade result. Result: 1. New firmware version: 3.0.0.13. [root@serial01-nj1 /tmp]# I am hoping someone on here has experienced this before and can give me some direction on how to get around it.
↧
Forum Post: delete this Post
Delete this Post - I could not find any delete button
↧
↧
Forum Post: Avocent Denys Logins
ACS6048 Firmware 3.0.0.13 The above terminal server hangs about once a week and only a power cycle will fix it. Login prompt is displayed, but banner is missing. Local and TACACS accounts fail to authenticate until power cycled. No access via SSH either. We are running the latest firmware that I know of. This also happens to other terminal servers of the same HW and FW version, but not as often. Please can you advise?
↧
Forum Post: DELL 0CK318 (OLD DELL PowerEdge 2161 DS-2) - password reset procedure
/cfs-file/__key/communityserver-discussions-components-files/105/0CK318_5F00_-pass-reset-procedure.docx ISSUE: forgotten / locked password for DELL 0CK318 unit Product Information: PN - 0CK318; SN - ELC1-1707 (cannot be checked in SAP) RESOLUTION: 1) On the KVM login prompt click "Forgot password" 2) Message box will open, providing the 16-digits key and EID, needed for the password reset 3) Use the Password Reset link in order to generate a temporary password (from the product list choose 2161DS-2)
↧
CVE-2007-4752 in Avocent Support
CVE-2007-4752 in Avocent Support
↧
syslog in Avocent Support
syslog in Avocent Support
↧
↧
Forum Post: Manual for a ECS17KMM-G01
I cannot locate the manual that came with the unit. Does someone out there have a digital copy of one they can send me?
↧
Does anyone know if Cisco ACS5.5 is supported in DSView4.5.0.140. I would assume so, but, haven't found anything in the documentation to confirm. in Avocent Support
Does anyone know if Cisco ACS5.5 is supported in DSView4.5.0.140. I would assume so, but, haven't found anything in the documentation to confirm. in Avocent Support
↧
Forum Post: fips 140-2
Trying to enable FIPS 140-2 on an ACS6000 but when I do DSVIEW is no longer able to communicate with it. DSVIEW is at 4.1.0.166 and ACS6000 is 3.1.0.8. Any one seen this?
↧
Forum Post: Local DSView4.5 Login Using Cisco ACS v5.5 TACACS+
Has anyone been successful in setting up DSView4.5 to authenticate with TACACS+ w/Cisco ACS5.5? I'm getting good connection attempts in TACACS log, but, it appears DSView4 issues a FIN/ACK before receiving the TACACS authentication response and login fails. I've only been able to successfully login to DSView4.5 with a DSView Internal account credential.
↧
↧
cisco 5.5 in Avocent Support
cisco 5.5 in Avocent Support
↧
Forum Post: 1 port IP KVM..
Hi Team, Can you please let me know DSR 1024 is still live one or EOL.
↧
Forum Post: ACS6048 SNMP setup through CLI
Hello, I am trying to enable SNMP for an ACS6048. The 'Command Reference Guide' shows were the SNMP settings live, but offer no example of enabling the avocent mib for use. On older Cyclades switches, I could have done something like: cli> config network snmp v1v2 add community avocent oid .1 permission ro What is the equivalent CLI command in the 6048? Or is there an root shell command that does this? Please provide examples or links to examples. I have trawled through all the documents for ACS, and found nothing that makes sense to me. Thanks in advance.
↧